Make a Classroom Seating Chart
The order matters more than the tool. Roster first, furniture second, rules third, generation fourth, hand-editing fifth, printing last — and the first week is a draft, not a verdict.
The six steps, in order
- 1
Paste the roster
24 names, one per line. Tags are optional.
- 2
Choose the furniture
pairs (two-seat desks) — 36 seats in this layout.
- 3
Write the rules you know
Start with two or three keep-apart pairs and the documented front-row students.
- 4
Generate and read the conflicts
A conflict list is the tool doing its job, not a failure.
- 5
Swap by hand, then pin
Two taps per swap; the lock switch keeps what already works.
- 6
Print three views
Teacher, student (flipped) and substitute — one page each.
Do it here
One student per line. Add , A or , B for the tag; names stay in this browser.
Two-seat desks in rows, with a walkway after every two desks.
24 students in 36 seats · 18 groups · seed 5150
Pairs (two-seat desks) · 36 seats · seed 5150
| Measure | Value | How it is counted |
|---|---|---|
| Seats | 36 | one per student, generated seat by seat |
| Pair desks | 18 | 18 × 2 = 36 seats |
| Groups | 18 | rotation units; the largest seats 2 |
| Front-row seats | 6 | row 1 — the row nearest the board |
| Walkways | 1 | full-length empty columns or rows inside the seat block |
| Floor used | 17.5 × 16.8 ft | 7 columns × 6 rows at 2.5 ft × 2.8 ft |
Rules: keep apart, sit together, front row, pins
Pinned seats: 0. Turn on lock mode below the chart, then tap a seat to pin the student in it.
The numbers, from this layout
| Measure | Value | How it is counted |
|---|---|---|
| Seats | 36 | one per student, generated seat by seat |
| Pair desks | 18 | 18 × 2 = 36 seats |
| Groups | 18 | rotation units; the largest seats 2 |
| Front-row seats | 6 | row 1 — the row nearest the board |
| Walkways | 1 | full-length empty columns or rows inside the seat block |
| Floor used | 17.5 × 16.8 ft | 7 columns × 6 rows at 2.5 ft × 2.8 ft |
Step 1 and 2: the roster, then the furniture
Paste the class list before you touch a layout. One name per line, and a comma plus A or B if you want the alternation tag for two reading groups or two languages. Paste order does not matter, because the solver shuffles; what matters is that nobody is missing, since an absent name is an unseated student the page will report.
Then choose the furniture you are not going to move. This is the step people skip and regret: a chart built for tables of four is a lie if the tables are bolted in rows. The layout list is furniture, and the seat count under the chart is what that furniture gives you in your room.
Step 3: write the rules you actually know
Start with the two or three pairs you are certain about and the students who must be at the front for a documented reason. Resist the urge to encode every hunch: every keep-apart pair is a constraint the solver must satisfy, and ten of them in a small room becomes a puzzle with no solution rather than a seating chart.
The rules are text, one pair per line, written with names. That is deliberate — a rule you can read back is a rule you can revise, and the page resolves names against the current roster every time you generate, so renaming a student is a rename rather than a rebuild.
Step 4: generate, and read the conflicts
Generate with the seed that is showing. If the chart comes back with a conflict list, the list is the useful part: it names the students, the seats and the rule. The three fixes in order of least damage are turning off diagonals, dropping the least important keep-apart pair, and adding a table or a row.
If the chart comes back clean, look at it before you print. The solver satisfies rules and balances tags; it does not know that one student needs to be near the door or that a left-handed student should not sit on the end of a right-handed bench. That is what step five is for.
Step 5: edit by hand, then lock what works
Tap two seats to swap their students. When a seat is right, pin it — the lock switch marks the seat and the next generate keeps that student exactly there while the rest of the room reshuffles. Two or three pins are usually enough to make a chart feel like a teacher made it.
Then use the rotate button once a week if you want the class to move. Rotation is checked against the rules before it is applied: if a rotation would break a keep-apart pair or move a pinned student out of the front row, the page refuses and says so, rather than quietly undoing your rules.
Step 6: three prints, not one
The teacher print is the chart with names, with the front of the room at the top. The student print is the same chart flipped so the front of the room is at the bottom — that is what the class sees when it is projected, and it stops the "who sits where" questions. The substitute print keeps the names and adds row and seat numbers so a stranger can run the room.
Print all three on the first day and keep the blank template in the folder for the week you decide the whole arrangement was wrong. A seating chart is not a contract; it is a plan you are allowed to change on Friday.
Questions this page gets asked
How long does this take the first time?
The typing is the slow part: a class of thirty is about a minute of pasting and a minute of deciding on rules. Generating is instant, and editing is two taps per swap. After that, a new term reuses the saved class and only the rules change.
Should I add every keep-apart pair I can think of?
No. Start with the pairs you are certain about, generate, and add more only if the chart is stable. Every rule narrows the search space, and a long list of speculative rules is the fastest way to get a conflict report instead of a chart.
What do I do when a student is absent on the day?
Leave the chart alone and let the empty seat stay empty; an empty seat is information. If the absence is long, unpin the student (if pinned), remove them from the roster and generate again — the seat count stays the same and the rest of the room barely moves.
Can I use the same chart for two classes that share a room?
Yes: save one class per section, keep the layout setting, and generate each roster separately. The layout, the seed and the rules stay with each class, so the second class is not a copy of the first.
Every number on this page is computed from the seat grid in your browser: seats, tables, groups, front-row seats, walkways and the floor a layout uses. The grid is a model of a clear rectangular room at 2.5 ft per seat column and 2.8 ft per row, not a survey — check doors, fixed furniture and your own fire code before you move anything.