Seating Chart for a Classroom: Which Layout Fits Your Room
A layout is a floor plan before it is a seating plan. Type the width and depth of the room and the page recomputes every layout from its seat grid: how many seats it really gives you, how many tables, how much floor it uses, and how many front-row seats you get.
Your room, layout by layout
One seat column is 2.5 ft wide and one row is 2.8 ft deep. Walkways are empty columns or rows.
| Layout | Seats | Desks / tables | Groups | Front row | Walkways | Floor used |
|---|---|---|---|---|---|---|
| Rows | 88 | 88 | 8 | 11 | 1 | 30.0 × 22.4 ft |
| Pairs | 80 | 40 | 40 | 10 | 2 | 30.0 × 22.4 ft |
| Groups of 4 | 48 | 12 | 12 | 8 | 5 | 27.5 × 22.4 ft |
| Groups of 6 | 54 | 9 | 9 | 9 | 4 | 27.5 × 22.4 ft |
| U-shape | 36 | 36 | 4 | 12 | 0 | 30.0 × 22.4 ft |
| Double U | 56 | 56 | 8 | 12 | 0 | 30.0 × 22.4 ft |
| Stadium | 40 | 40 | 8 | 5 | 0 | 30.0 × 22.4 ft |
| Lab benches | 16 | 4 | 4 | 4 | 3 | 10.0 × 19.6 ft |
Open one layout and seat the class
One student per line. Add , A or , B for the tag; names stay in this browser.
Straight rows of single desks with one central walkway once the room is five or more seats wide.
24 students in 42 seats · 6 groups · seed 2024
Rows facing the board · 42 seats · seed 2024
| Measure | Value | How it is counted |
|---|---|---|
| Seats | 42 | one per student, generated seat by seat |
| Desks | 42 | one desk per seat |
| Groups | 6 | row bands and arms, used by the rotate button |
| Front-row seats | 7 | row 1 — the row nearest the board |
| Walkways | 1 | full-length empty columns or rows inside the seat block |
| Floor used | 20 × 16.8 ft | 8 columns × 6 rows at 2.5 ft × 2.8 ft |
Rules: keep apart, sit together, front row, pins
Pinned seats: 0. Turn on lock mode below the chart, then tap a seat to pin the student in it.
Two numbers decide most of it
Width and depth. At 2.5 ft per seat column and 2.8 ft per row, a 30 × 24 ft room offers twelve columns and eight rows of grid — but a layout does not use every cell, because a table needs two or three columns and a walkway needs one. The table on this page is the honest consequence: that room seats 88 students in plain rows and 48 at tables for four, and neither number is a guess.
This is why "how many students fit" is the wrong question to ask a floor plan. Ask what furniture you are willing to move. Rows fit the most students and give the worst group work. Tables for four cut the capacity roughly in half and make group work possible without moving anything. A U-shape costs the most seats per student and buys the most eye contact.
Sight lines, not just seat counts
Every layout on this page puts row one nearest the board, so the front-row seat count is a real number you can plan against: it is the number of students who can be pinned to the front without argument. If four students need the front row and the layout has three front-row seats, the page tells you before you print rather than after a parent asks.
Stadium rows exist because a flat grid hides the board behind heads once a room is wide and shallow. Each row steps one cell sideways, so the student in row four is offset from the student in row three and sees the gap. The cost is floorspace: the same room holds fewer seats than plain rows, and the table shows that cost rather than hiding it.
The U-shape trade-off, stated plainly
A horseshoe is the best discussion layout and the least efficient storage of children. Every seat has a line of sight to every other seat, the teacher can stand in the middle, and nobody has a back to the room. The middle of the room, though, is walkway: the room that fits 88 in rows fits 36 in a U-shape, and the table above is where that trade is visible before you move anything.
The double U is the compromise for larger rooms: an outer horseshoe with a second one nested inside, one walkway cell apart. It roughly doubles the seats and keeps the sight lines, at the cost of a room that feels full and a walkway that has to be wide enough for a chair to move. If the inner U makes the outer one unreachable, the layout is wrong for the room, not the other way round.
Walkways are counted, not assumed
A walkway on this page means a full-length empty column or row inside the seat block: a lane you can actually walk down. Partial gaps are not counted, because a hole that only one row leaves empty is not a route. That definition is why tables for four show more walkways than tables for six, and why a spaced exam layout shows a walkway on every side of every seat.
The number matters for behaviour as much as for fire code: the teacher who can reach a table without asking three students to move is the teacher who can intervene in ten seconds. A layout with one wide central walkway and no side aisles looks tidy on paper and fails in the fourth week.
From the comparison to a chart
Pick a layout from the switcher and the chart below the table redraws with the demo class in that room. Generate the real class, add the keep-apart and front-row rules, and print. If the room cannot hold the class in the layout you wanted, the seat count in the table is the argument for moving furniture — or for a different layout — before the term starts.
Questions this page gets asked
How are the seat counts calculated?
From the layout grid. One column is 2.5 ft and one row is 2.8 ft; the page divides the room by those numbers, builds the layout from the resulting cells, and counts the cells that contain a seat. Walkway columns and rows are empty cells and are reported separately, so the seat count never includes a walkway.
Why does the same room give different seat counts per layout?
Because layouts use the grid differently. Plain rows use every column; tables for four use two columns plus one walkway per table; a U-shape leaves the middle empty on purpose. The comparison table is exactly that trade-off in numbers.
What if my room is not rectangular?
Use the width of the widest clear rectangle and the depth from the board to the back wall, then expect fewer seats than the page shows if a door, a sink or a fixed cabinet eats a corner. The layout is a model of a clear rectangular floor, which is the shape most classrooms approximate.
Can I put the teacher desk at the back?
Yes. The desk switch moves it from the front of the room to the back, and the chart redraws with it. In student view the desk follows the flip, because the flip is about what the class sees, not about where the furniture is.
Every number on this page is computed from the seat grid in your browser: seats, tables, groups, front-row seats, walkways and the floor a layout uses. The grid is a model of a clear rectangular room at 2.5 ft per seat column and 2.8 ft per row, not a survey — check doors, fixed furniture and your own fire code before you move anything.